aaron eckhart dating molly sims - Updating 1220 cisco

Our Word of the Year choice serves as a symbol of each year’s most meaningful events and lookup trends.It is an opportunity for us to reflect on the language and ideas that represented each year.

Firmware Version .00 Firmware Image compatible with Controller. NVDATA Version .00 Checking for a compatible NVData image... Also, if you run into networking issues look at disabling TSO offloading (see comments). Download the Free NAS ISO from a new VM, choose custom, put it on one of the drives on the SATA ports, Virtual Machine version 11, Guest OS type is Free BSD 64-bit, 1 socket and 2 cores. On Networking give it two adapters, the 1st NIC should be assigned to the VM Network, 2nd NIC to the Storage network. SCSI controller should be the default, LSI Logic Parallel. If you have a second local drive (not one that you’ll use for your zpool) here you can add a second boot drive for a mirror.

Under v Switch1 go to Properties, select v Switch, Edit, change the MTU to 9000. Then select the Storage Kernel port, edit, and set the MTU to 9000. Before finishing the creation of the VM click Add, select PCI Devices, and choose the LSI 2308. On reboot you should notice that the VMXNET3 NICS now work (except the NIC on the storage network can’t find a DHCP server, but we’ll set it to static later), also you should notice that VMware is now reporting that VMware tools are installed.

I strongly suggest pulling all drives before flashing. t=1758318Supermicro firmware: ftp://ftp.supermicro.com/Driver/SAS/LSI/2308/Firmware/IT/Instructions for flashing firmware:https://forums.freenas.org/index.php? threads/confirmation-please-lsi-9211-i8-flashing-to-p20.40373/LSI / Avago Firmware: you already have the card passed through to Free NAS via VT-d (steps 6-8) you can actually flash the card from Free NAS using the sas2flash utility using the steps below (in this example my card is already in IT mode so I’m just upgrading it): [[email protected]] # cd /root/ [[email protected]] # mkdir m1015 [[email protected]] # cd m1015/ [[email protected]] # wget # chmod x /usr/local/sbin/sas2flash [[email protected]] # sas2flash -o -f Firmware/HBA_9211_8i_IT/2118-b sasbios_rel/mptsas2LSI Corporation SAS2 Flash Utility Version .00 (20) Copyright (c) 2008-2013 LSI Corporation. This was on an HGST 840z so not sure if the same holds true for the Intel DC S3700… Some people are having trouble with an MTU of 9000.

All rights reserved Advanced Mode Set Adapter Selected is a LSI SAS: SAS2008(B2) Executing Operation: Flash Firmware Image Firmware Image has a Valid Checksum. I suggest leaving the MTU at 1500 and make sure everything works there before testing an MTU of 9000.

Also Export the Private Key of the CA and store it some place safe. Change the protocol to HTTPS and select the certificate you created.